Water Testing Kit

Approx. Rs 900 / PieceGet Latest Price

Approx. Rs 1,500 / PieceGet Latest Price

Additional Information:

Approx. Rs 375 / BoxGet Latest Price

Indicator Paper Testing have been developed with a mixture of several indicators, which on contact with the sample solution assume a particular color. A check against the color comparision table supplied allows the parameter to be determined. AQUASOL range offers a range of pH indicator and other test papers to meet your specific testing needs. Our AQUASOL Indicator Paper combine ease-of-use with accuracy, consistency and unmatched quality.The convenience of using AQUASOL Indicator Paper for the rapid determination of pH and other parameters has many applications in laboratories and industry.

Features and Benefits

• Instant readings
• Economical in Kangaroo Pack
• Accurate for a wide range of testing
• Convenient and portable

Approx. Rs 900 / KitGet Latest Price

BSK Technologies are offering hardness testing kits When water passes through or over deposits such as limestone, the levels of ca2+, mg2+, and hco3– ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems ,such as boiler, cooling system, cause scale formation in plumbing, heating appliances, and boilers. Measuring total hardness is essential to monitor – softener, demineralization, RO plant, softening processes, etc.  Our AQUASOL hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries, where water is the most important ingredient/parame.

Approx. Rs 2,000 / PieceGet Latest Price

Iron Test Kitis a naturally occurring mineral found in water especially groundwater which has come in contact with iron-containing rock or soil. Insoluble iron can clog valves and strainers and can cause excessive sludge build up in low lying areas of a water system. It also leads to boiler deposits that can cause tube failure. Suspended or dissolved iron coming in the feed water will also deposit on the boiler metal. Checking iron in boiler and cooling water helps to monitor corrosion level in water. AQUASOL iron test gives a clear red colour result which is then compared with the colour chart provided.

Approx. Rs 1,000 / PieceGet Latest Price

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

• Product Code: AE409
• Range: 0.05 – 5.0 PPM (MG/L)
• No of Tests: 1000
• HSN: 90275090
• Packing: Plastic Case

Additional Information:

Approx. Rs 1,300 / PieceGet Latest Price

Approx. Rs 1,500 / PieceGet Latest Price

Carbon dioxide can react with water to form carbonic acid (h2co3). Carbonic acid will cause corrosion in steam and return lines. Carbon dioxide can originate from condenser air leakage or bicarbonate (hco3) alkalinity in the feed water.Our AQUASOL test for carbon dioxide is a titrimetric kit, packaged with standardized reagents ready to use, convenient and accurate.

Approx. Rs 1,500 / PieceGet Latest Price

Chloride ions are one of the major inorganic anions in water and wastewater. Although high concentrations of chloride in water are not known to be toxic to humans, they may corrode metal pipes. It is essential to monitor chloride concentration in boiler systems to prevent damage of metal parts. In high levels, chloride can corrode stainless steel and be toxic to plant life. Therefore chloride is one of the very important parameters, which is frequently tested and our AQUASOL kit, makes testing easy, simple at the same time accurate.

Approx. Rs 1,730 / PieceGet Latest Price

Approx. Rs 1,200 / Piece(s)Get Latest Price

pH Test Kit is the standard measure of how acidic or alkaline a solution is. It is a measure of the hydrogen ion concentration in solution. Ph is important because chemical processes take place when water has a certain ph. A ph indicator, giving different colors at different ph is a simple and reliable method to read ph for routine monitoring. Our AQUASOL ph water test kit comprises of a universal indicator, giving clear colours which match the colour chart perfectly. An extremely easy to use product, it finds usage in almost all processes.

Approx. Rs 1,700 / PieceGet Latest Price

Approx. Rs 1,000 / PieceGet Latest Price

Approx. Rs 850 / PieceGet Latest Price

Approx. Rs 1,850 / KitGet Latest Price

Approx. Rs 700 / PieceGet Latest Price

Approx. Rs 1,200 / PieceGet Latest Price

Approx. Rs 700 / PieceGet Latest Price

Approx. Rs 2,000 / PieceGet Latest Price

Approx. Rs 1,650 / PieceGet Latest Price

Ammonia is present in variable concentrations in many surface and ground water supplies. It is rapidly oxidized by certain bacteria, in natural water systems, to nitrite and nitrate a process that requires the presence of dissolved oxygen. Ammonia, being a source of nitrogen is also a nutrient for algAE and other forms of plant life and thus contributes to overloading of natural systems and cause pollution. Ammonia is important to be tested in fisheries.
Our AQUASOL ammonia test is based on colour comparison and results obtained are easily discernible.

Approx. Rs 1,500 / PieceGet Latest Price

Approx. Rs 1,900 / PieceGet Latest Price

It works by forming a protective coat inside pipes in the distribution systems and in customer homes to prevent lead from leaching into drinking water. The other name is phosphoric acid, and it is used to control alkalinity/acidity in foods and beverages.
It is a vital parameter for boiler, cooling and process water treatment. This water testing kit is again based on colour comparison.
This kit is available in both low and high ranges.

Approx. Rs 1,200 / PieceGet Latest Price

Approx. Rs 3,000 / Piece(s)Get Latest Price

Sewage treatment units. D.o. is essential for the aquatic plant and animal life. Do is detrimental in boiler systems because it leads to corrosion in boiler systems. Do analysis measures the amount of gaseous oxygen (o2) dissolved In an aqueous solution DO measurement is a tricky business, but our kit makes testing easy and simple.

Approx. Rs 2,200 / PieceGet Latest Price

Fluoride Test Kit occurs naturally in all types of water. Typically, surface waters and sea waters have low concentration of fluoride while groundwater may contain high levels of fluoride as it may be exposed to many inorganic fluoride-containing minerals. Fluoride salts are also frequently encountered in many industrial applications. Fluoride is important in drinking water as excessive fluoride cause mottling. A permissible limit has been laid down for fluoride therefore analysis of fluoride is mandatory in drinking water. Our fluoride water test is one of its kinds and works on the titrimetric principle. The end point is a clear yellow.

Approx. Rs 2,700 / PieceGet Latest Price

Formulations containing molybdate are used as corrosion inhibitors in industrial water treatment. In particular, molybdate finds application in closed recirculating systems such as water heating systems and chilled water systems. Since molybdates are widely used in water treatment and industrial processes, testing molybdate is becoming increasingly important for effluents and industrial discharges. This water test kit is a colour comparison one and can give 325 tests in one kit.

Approx. Rs 1,700 / PieceGet Latest Price

Nitrate Test Kits are inorganic salts that occur as a natural or manmade contaminants in drinking water. High nitrate levels indicate the presence of other pollutants, such as bacteria or pesticides, as these follow the same path as the nitrate into the water supply. Our nitrate water test kit is based on a colour comparison method. It is a very sensitive one and giving distinct colours which are easily comparable with the chart provided.

Approx. Rs 1,850 / PieceGet Latest Price

Sewage treatment units. D.o. is essential for the aquatic plant and animal life. Do is detrimental in boiler systems because it leads to corrosion in boiler systems. Do analysis measures the amount of gaseous oxygen (o2) dissolved In an aqueous solution DO measurement is a tricky business, but our kit makes testing easy and simple

Approx. Rs 1,000 / PieceGet Latest Price

Approx. Rs 1,600 / PieceGet Latest Price

The corrosiveness of process water due to hydrogen peroxide depends on the amount of dissolved oxygen that is produced. Oxygen corrodes iron-containing metals. Hydrogen peroxide is used as a disinfectant. H2o2 is used to disinfect drinking water. It is also used to combat excessive microbial growth in water systems and cooling towers. AQUASOL hydrogen peroxide test kit helps to estimate the concentration of h2o2 in water.

Approx. Rs 3,120 / PieceGet Latest Price

Approx. Rs 1,800 / PieceGet Latest Price

Silica (sio2) is an oxide of silicon, and is present in almost all minerals. It is found in surface and well water. Silica is a problem for high pressure boilers, as it exhibits enough volatility that high pressure boilers will have silica carry over to the vapour partition. When the steam pressure is reduced in turbines, silica will precipitate on the blades as a glassy deposit, which reduces efficiency. Measuring silica in water is useful to monitor demineralizer for boiler water treatment. The silica water test is available as 4 different products in very low and very high ranges.

Approx. Rs 2,000 / Piece(s)Get Latest Price

Sulphate is a constituent of TDS and may form salts with sodium, potassium, magnesium and other cations. Sulphate (so4-2) is widely distributed in nature and may be present in natural waters at concentrations ranging from a few to several hundred milligrams per litre. Sulphate can cause scale build-up in water pipes. Sulphates are also food for theAnaerobic slime formers the sulphate reducing bacteria which are responsible for pitting type of corrosion in pipes.The AQUASOL water test kit for sulphate is based on titrimetry and is extremely user friendly. Sulfate-reducing bacteria (SRB) are those bacteria that can obtain energy by oxidizing organic compounds or molecular hydrogen while reducing sulfate to hydrogen sulfide. They are also know as sulfide generating bacteria (SGB) and commonly found in anaerobic environments where they aid in the degradation of organic materials like secondary oil recovery effluents, estuarine waters, deep wells, cooling waters, metalworking fluids, water-based hydraulic fluids, and petroleum based products. They can survive up to 600C & cause pitting corrosion on metal structures that are exposed to sulfate-containing water by cathodic depolarization. They also play a role in the anaerobic oxidation of methane below the seabed in the transition zone which leads to heavy production loss. Since sulfate is also found in some formulations of or the other used in water treatment, viz, corrosion inhibitors, coolants, etc. Sulfate acts as a hydrogen acceptor produces hydrogen sulfide and ferrous sulfide. These together form a malodorous black slime. In some case bubbles of H2S rise though the water and cause objectionable odors. The corrosion of iron by sulfate reducing bacteria is rapid and unlike ordinary rusting, is not self – limiting. Our specially developed test kit with a unique 10ml sample size gives a much detailed quantitative analysis of the SRB count in a sample. Bactaslyde SRB is supplied in boxes of 5 along with the complete instructions set for a complete quantitative analysis of the contamination.

Approx. Rs 600 / PieceGet Latest Price