Measuring Instruments

Approx. Rs 750 / PieceGet Latest Price

BSK TECHNOLOGIES Offers  the most economical Hm Pocket, portable, on line tds meters, Tds Indicators, Tds Controllers, TDS Transmitters etc.,
TDS Meter Pocket type Meter - TDS-3
Features:
Ideal for commercial use. Includes a carrying case with belt clip.
Highly efficient and accurate due to its advanced microprocessor technology.
Hold Function: saves measurements for convenient reading and recording.
Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
Built-in digital thermometer
Display: large and easy-to-read LCD screen.
Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution.
Meters can be recalibrated with a mini-screwdriver.
Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).
Specifications:
TDS Range: 0 - 9990 ppm (mg/L)
Temp. Range: 0 - 80 degrees Celsius
Resolution: 1 ppm, 1 degree Celsius (also available in 10 ppm)
Accuracy: /- 2%
Conversion Factor: NaCl (avg. 0.5)
ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)
Power source: 2 x 1.5V button cell batteries (included) (357A)
Battery life: 1000 hours of usage
Dimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)
Weight with case: 76.5g (2.7 oz)
Weight without case: 56.7g (2 oz)

Additional Information:

Approx. Rs 2,200 / PieceGet Latest Price

BSK Technologies suppliers of Digital POrtable Lux meters of wide range & for different application Industries with best accuracy 
Features
Data Hold
Max/Min
Back Light
Lux / FC Measurment
Spectral range 320 ~ 730nm
Auto Power Off (APO 10 Min)
Power : AAA 1.5 V X 3
Standard Accesories : Manual, Soft Carry Case
Dimension : 138 (H) X 56(W) X 25(D) mm
TECHNICAL DATABasic FunctionRangeResolutionAccuracyIlluminationLUX1000, 10000, 20000010 Lux(3.0% + 5 dgts) at 2854 K incandesecent lampFC100, 1000, 200001 FCCosine angle deviation 30±2% , 60 ±6% , 80 ±25%Sensor TypeSilcion Photo-diode and Spectral response filterTemperatureºC-20.0~60.0ºC0.1ºC0.0ºC ~ 45.0ºC ± 1.0ºC others ±1.5ºCºF-4.0~140.0ºC1ºF32ºF ~ 113ºF ± 2.0ºF others ± 3.0ºFHumidity0.0% ~ 99.9% RH0.1%RH20%~80% ±5.0% RH others ± 6.0% RH

Additional Information:

Approx. Rs 3,000 / PieceGet Latest Price

Additional Information:

Approx. Rs 4,000 / PieceGet Latest Price

The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 °C (572 °F). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.

• CAL Check to verify meter performance
• Waterproof to IP67 Standards
• Wake on motion

Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.

The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3') in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.

The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79") thick.

HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 oC) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate

With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.

The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.

Additional Information:

Approx. Rs 22,500 / PieceGet Latest Price

Approx. Rs 2,000 / PieceGet Latest Price