Water Testing Kit
BSK Technologies Offers AQUASOL water testing kits are extremely simple and easy to use & make monitoring convenient and quick, thus preventive action can be taken immediately. You neither have to be a trained chemist nor require any experience to get reliable results from these test kits.
AQUASOL water testing kits based on standard and established analytical methods, backed by chemical research. These are simple adaptations of classic chemical analytical methods. The analytical methods are based on Standard Methods for Examination of Water and Waste Water prepared by American Public Health Association (APHA), American Water Works Association (AWWA), different pharmacopoeias and other standard methods.
You can have complete confidence in the results you obtain from AQUASOL water testing kits, as they are extremely reliable. AQUASOL water testing kits replace conventional analytical methods such as Titrimetric, Colorimetric and Spectrophotometric by simple drop test & standard colour comparison methods.
AQUASOL water testing kits reagents are completely ready to use, conveniently packed, and therefore user friendly. Our drop count procedures and suitable colour comparisons are also economical.
AQUASOL water testing kits are extremely convenient, and free you from the tedium of the laboratory, while saving precious time. Now you do not have to bother about reagent preparations and standardization, therefore AQUASOL water testing kits have been designed especially for you, who require accuracy of the highest standards. AQUASOL water testing kits are available for almost all water parameters.
Alkalinity Test Kits
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Shelf Life | 6 Months |
| Model Number | AE 204 |
| Product Code | AE 204 |
| Range | 5 100, 25 500 |
| Number Of Tests | 300 |
| Alkalinity | 5 100, 25 500 |
| Measuring Range (mg per L) | 5 100, 25 500 |
The alkalinity of water is capacity of water to neutralise acid to desired ph. It is mainly a sum of carbonate, bicarbonate and hydroxide ions. Salts of weak acids like borate, silicate and phosphate may also contribute to alkalinity. Alkalinity is important in the treatment of potable water, waste water, boiler and cooling water. Our alkalinity kit is available in two ranges & a very easy to use test to gives reliable results. Specifications: Code Range No of test AE-204 10-200, 100-2000 mg/l as caco3 300 AE-214 5-100, 25-500 mg/l as caco3 300
Fluoride Test Kit
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Testing Type | Drop method |
| Number Of Tests | 500 |
| Model Number | AE 210 |
| Type of Water | Drinking Water |
| Physical Quality Testing | Fluoride |
| Microbiological Testing Required | No |
| Usage/Application | water |
| Type | drop method |
Fluoride Test Kit occurs naturally in all types of water. Typically, surface waters and sea waters have low concentration of fluoride while groundwater may contain high levels of fluoride as it may be exposed to many inorganic fluoride-containing minerals. Fluoride salts are also frequently encountered in many industrial applications. Fluoride is important in drinking water as excessive fluoride cause mottling. A permissible limit has been laid down for fluoride therefore analysis of fluoride is mandatory in drinking water. Our fluoride water test is one of its kinds and works on the titrimetric principle. The end point is a clear yellow. Specifications: Code Range No of test AE-210 0.2-2.0, 0.5-5.0 mg/l as fluoride 500 AE-210h 1-20 mg/l as fluoride 500
Hydrogen Peroxide Test Kit
Approx. Rs 1,600 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Packaging Type | Box |
| Type | Titration |
| Testing Type | Drop |
| Model Name/Number | AE HP |
| Usage/Application | Laboratory |
The corrosiveness of process water due to hydrogen peroxide depends on the amount of dissolved oxygen that is produced. Oxygen corrodes iron-containing metals. Hydrogen peroxide is used as a disinfectant. H2o2 is used to disinfect drinking water. It is also used to combat excessive microbial growth in water systems and cooling towers. AQUASOL hydrogen peroxide test kit helps to estimate the concentration of h2o2 in water.Specifications:CodeRangeNo of testAE-HP5-100 & 50-1000 mg/l as h2o2300
Hardness Test Kit
Approx. Rs 700 / KitGet Latest Price
When water passes through or over deposits such as limestone, the levels of ca2+, mg2+, and hco3– ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems ,such as boiler, cooling system, cause scale formation in plumbing, heating appliances, and boilers. Measuring total hardness is essential to monitor – softener, demineralization, RO plant, softening processes, etc. Our AQUASOL hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries, where water is the most important ingredient/parameAdditional Information:
Acidity Test Kit
Approx. Rs 1,000 / Piece(s)Get Latest Price
The acidity of water is the capacity of water to neutralize base to desired ph.Acidity Test Kitis caused by weak organic acids and strong mineral acids. It indicates corrosion of water. This AQUASOL water test is a titration test and is extremely easy and convenient and gives accurate results. Specifications Code Range AE-264 10-200 & 100-2000 mg/l as caco3Amine Test Kit
Approx. Rs 1,200 / Piece(s)Get Latest Price
Product Details:| Shelf Life | 6 Months |
| Number Of Tests | 300 |
Amines are used as neutralizing agents for condensation water in boiler treatment. This helps to control corrosion.This water test kit is available in two ranges as two separate kits. Both give results in terms of cyclohexylamine. Specifications: Code Range No of test AE-402 5-100 & 50-10100 mg/l as cyclohexylamine 300 AE-412 1-20 mg/l as cyclohexylamine 300
Ammonium Test Kit
Approx. Rs 1,600 / PieceGet Latest Price
Ammonia is present in variable concentrations in many surface and ground water supplies. It is rapidly oxidized by certain bacteria, in natural water systems, to nitrite and nitrate a process that requires the presence of dissolved oxygen. Ammonia, being a source of nitrogen is also a nutrient for algAE and other forms of plant life and thus contributes to overloading of natural systems and cause pollution. Ammonia is important to be tested in fisheries.Our AQUASOL ammonia test is based on colour comparison and results obtained are easily discernible.SpecificationsCodeRangeNo of testAE-3070.5, 1.0, 2.0, 4.0, 6.0, 8.0 mg/l as nh4250AE-3170.05, 0.1, 0.25, 0.5, 0.75, 1.0 mg/l as nh4100
Additional Information:
Calcium Hardness Test Kit
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Shelf Life | 6 Months |
| Number Of Tests | 300 |
| Model Number | AE 202 |
Calcium hardness is caused by the presence of calcium ions in the water. Calcium salts can be readily precipitated from water and high levels of calcium hardness tend to promote scale formation in the water system. Calcium hardness is an important control test in industrial water systems such as boilers and steam raising plants. Our kit tests even high levels of calcium in water. Specifications: Code Range No of test AE-202 5-100 mg/l as caco3 300 AE-212 25-500 mg/l as caco3 300
Carbon Dioxide Test Kit
Approx. Rs 1,500 / PieceGet Latest Price
Product Details:| Model Number | AE 403 |
| Shelf Life | 6 Months |
| Number Of Tests | 300 |
Carbon dioxide can react with water to form carbonic acid (h2co3). Carbonic acid will cause corrosion in steam and return lines. Carbon dioxide can originate from condenser air leakage or bicarbonate (hco3) alkalinity in the feed water.Our AQUASOL test for carbon dioxide is a titrimetric kit, packaged with standardized reagents ready to use, convenient and accurate.
Specifications:
Code
Range
No of test
AE-403
2 – 40 & 10 – 200 as co2
300
Chloride Test Kit
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Model Number | AE 203 |
| Shelf Life | 6 Months |
| Number Of Tests | 300 |
Chloride ions are one of the major inorganic anions in water and wastewater. Although high concentrations of chloride in water are not known to be toxic to humans, they may corrode metal pipes. It is essential to monitor chloride concentration in boiler systems to prevent damage of metal parts. In high levels, chloride can corrode stainless steel and be toxic to plant life. Therefore chloride is one of the very important parameters, which is frequently tested and our AQUASOL kit, makes testing easy, simple at the same time accurate. Specifications: Code Range No of test AE-203 10-200, 50-1000 mg/l as chloride 300 AE-213 2-40, 5-100 mg/l as chloride 300 AE-213a 1-20 mg/l as chloride 300
Chlorine Test Kit
Approx. Rs 1,000 / Piece(s)Get Latest Price
Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand, contact time, ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL chlorine test is available as three different types, DPD method, Iodometric method and OT method. The kit gives very reliable results. The end point is very sharp and easily discernible by the user. Even a shop floor worker will be able to get desired results with our test kit. Specifications: Code Range No of test AE-205 0.1-2.0 mg/l as chlorine 200 AE-215 0.2-4 mg/l as chlorine 200 AE-246 10-200 mg/l as chlorine 300 AE-246l 1-20 mg/l as chlorine 300 AE-235 0.05, 0.1, 0.2, 0.4, 0.7, 1.0 mg/l as cl2 450 AE-236 0.5, 1.0, 2.0, 3.0, 4.0, 5.0 mg/l as cl2 450 AE-237 0.2, 0.4, 0.7, 1.0, 2.0, 3.0 mg/l as cl2 450 AE-238 0.1, 0.2, 0.5, 1.0, 1.5, 2.0 mg/l as cl2 450 AE-239 0.1, 0.2, 0.5, 1.0, 1.5, 2.0 mg/l as cl2 225Copper Test Kit
Approx. Rs 1,730 / PieceGet Latest Price
Product Details:| Shelf Life | 6 Months |
| Number Of Tests | 250 |
| Model Number | AE 310 |
Copper Test Kitis a metal that exists in the environment as a mineral in rocks and soil. It is commonly found at low levels in natural water bodies. Consumption of high levels of copper can cause nausea, vomiting, diarrhoea, gastric complaints and headaches. Copper salts are used to control algAE. The copper water test kit is based on colour comparison and can do 250 tests. Specifications Code Range No of test AE-310 0,0.5,1.0,1.5,2.0,2.5 mg/l as copper 250
Hydrazine Test Kit
Approx. Rs 3,120 / Piece(s)Get Latest Price
Hydrazine Test Kitis used as an oxygen scavenger for high pressure boilers in power plants and other industries to reduce corrosion of metal pipes and fittings. Our hydrazine water test kit is regular used for high pressure boiler monitoring, the results are easily discernible and can be used by shop floor personnel. Specifications Code Range No of test AE-304 0.1,0.2,0.3,0.4,0.5,0.75 mg/l as hydrazine 200Iron Test Kit
Approx. Rs 1,000 / Piece(s)Get Latest Price
Iron Test Kitis a naturally occurring mineral found in water especially groundwater which has come in contact with iron-containing rock or soil. Insoluble iron can clog valves and strainers and can cause excessive sludge build up in low lying areas of a water system. It also leads to boiler deposits that can cause tube failure. Suspended or dissolved iron coming in the feed water will also deposit on the boiler metal. Checking iron in boiler and cooling water helps to monitor corrosion level in water. AQUASOL iron test gives a clear red colour result which is then compared with the colour chart provided.SpecificationsCodeRangeNo of testAE-3030.05,0,0.1,0.3,0.4,0.7,1.0,1.5,2.0 mg/l as fe175AE-3130,2,4,6,8,10 mg/l as iron175Molybdate Test Kit
Approx. Rs 2,700 / Piece(s)Get Latest Price
Formulations containing molybdate are used as corrosion inhibitors in industrial water treatment. In particular, molybdate finds application in closed recirculating systems such as water heating systems and chilled water systems. Since molybdates are widely used in water treatment and industrial processes, testing molybdate is becoming increasingly important for effluents and industrial discharges. This water test kit is a colour comparison one and can give 325 tests in one kit.
Specifications:
Code
Range
No of test
AE-309
5,10,20,30,40,50 mg/l as no3
325
Nitrate Test Kit
Approx. Rs 1,700 / PieceGet Latest Price
Product Details:| Model Number | AE 308 |
| Shelf Life | 6 Months |
| Number Of Tests | 400 |
Nitrate Test Kitare inorganic salts that occur as a natural or manmade contaminants in drinking water. High nitrate levels indicate the presence of other pollutants, such as bacteria or pesticides, as these follow the same path as the nitrate into the water supply. Our nitrate water test kit is based on a colour comparison method. It is a very sensitive one and giving distinct colours which are easily comparable with the chart provided. Specifications Code Range No of test AE-308 1.0,2.5,7.5,5,10,20,30,40,50 mg/l as no3 400
Nitrite Test Kit
Approx. Rs 1,500 / PieceGet Latest Price
Product Details:| Shelf Life | 6 Months |
| Number Of Tests | 300 |
| Packaging Type | Box |
| Type | Compact |
Nitrite Test Kitoccur in water as an intermediate product in the biological breakdown of organic nitrogen, being produced either through the oxidation of ammonia or the reduction of nitrate. The presence of large quantities of nitrites is indicative of waste water pollution. Low range nitrite estimation is useful for drinking water analysis. Nitrite is added to control corrosion in closed cooling systems. We have two kits for nitrite one a very low range, especially for drinking and the higher one for waste water. Our AQUASOL kits are based on colour comparison. They are very simple and convenient to use. Specifications Code Range No of test AE-207 5-100, 50-1000 mg/l as nano2 300 AE-217 0.04-0.8 mg/l as no2 400
Orthophosphate Test Kit
Approx. Rs 1,900 / PieceGet Latest Price
Product Details:| Number Of Tests | 100 |
| Model Number | AE 301 |
| Shelf Life | 6 Months |
Orthophosphate is a commonly used corrosion inhibitor that is added to finished drinking water. It works by forming a protective coat inside pipes in the distribution systems and in customer homes to prevent lead from leaching into drinking water. The other name is phosphoric acid, and it is used to control alkalinity/acidity in foods and beverages. It is a vital parameter for boiler, cooling and process water treatment. This water testing kit is again based on colour comparison. This kit is available in both low and high ranges.
Specifications:
Code
Range
No of test
AE-301
0.0,5,10,20,30,40 mg/l as po4
100
AE-311
0.1,0.2,0.5,1.0,2.5,5.0,7.5,10 mg/l as po4
500
Phosphonate Test Kit
Approx. Rs 1,700 / PieceGet Latest Price
Product Details:| Number Of Tests | 300 |
| Model Number | AE 401 |
Phosphonates a are a class of chelating agents and scale inhibitors, used in household cleaning products, personal care products, institutional cleaners and industrial cleaning processes and water treatment additives in various applications. They play an important role in boiler, cooling and process water treatment. The phosphonate water testing kit is available for both low and high ranges and used by boiler maintenance personnel frequently. Specifications: Code Range No of test AE-401 5-100 & 50-1000 mg/l as phosphonate 300 AE-411 2-40 & 5-100 mg/l as phosphonate 300
Silica Test Kit
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Testing Type | Drop method |
| Packaging Type | Box |
| Usage/Application | Water |
Silica (sio2) is an oxide of silicon, and is present in almost all minerals. It is found in surface and well water. Silica is a problem for high pressure boilers, as it exhibits enough volatility that high pressure boilers will have silica carry over to the vapour partition. When the steam pressure is reduced in turbines, silica will precipitate on the blades as a glassy deposit, which reduces efficiency. Measuring silica in water is useful to monitor demineralizer for boiler water treatment. The silica water test is available as 4 different products in very low and very high ranges.Specifications:CodeRangeNo of testAE-3025,10,20,40,60,80 mg/l as sio2400AE-3120.01,0.025,0.05,0.075,0.1 mg/l as sio275AE-3220.2,0.4,0.8,1.5,3.0,5.0 mg/l as sio2100AE-33275,100,125,150,175,200 mg/l as sio2100
Tannin Test Kit
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Shelf Life | 6 Months |
| Number Of Tests | 300 |
Tannin is a natural organic material that is the by product of nature's fermentation process, created as water passes through peaty soil and decaying vegetation. Tannins create a light yellow to dark brown discoloration of the water, and cause yellow staining on fabrics, fixtures, and laundry. Tannin based formulations are used for prevention of scale and corrosion in steam boilers, closed cooling systems and steam locomotives. The tannin test kit is a titrimetric one and has reagents for 2 ranges in the same kit, making it portable and user friendly. Specifications: Code Range No of test AE-2tn 5-100, 25-500 mg/l as tannin 300 AQUASOL test kits are available for almost all water parameters as mentioned below.
Total Hardness Test Kit
Approx. Rs 600 / PieceGet Latest Price
When water passes through or over deposits such as limestone, the levels of ca2+, mg2+, and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems ,such as boiler, cooling system, cause scale formation in plumbing, heating appliances, and boilers. Measuring total hardness is essential to monitor softener, demineralization, RO plant, softening processes, etc. Our AQUASOL hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries, where water is the most important ingredient/parameter.SpecificationsCodeRangeNo of testAE-2012-40, 5-100 mg/l as caco3250AE-2112-40, 25-500 mg/l as caco3250AE-2215-100, 25-500 mg/l as caco3250AE-2311-20, 5-100 mg/l as caco3250AE-5012-40, 5-100 mg/l as caco3500AE-5112-40, 25-500 mg/l as caco3500AE-5215-100, 25-500 mg/l as caco3500AE-5311-20, 5-100 mg/l as caco3500Additional Information:
Zinc Test Kit
Approx. Rs 1,000 / Piece(s)Get Latest Price
Zinc is introduced into water naturally by erosion of minerals from rocks and soil, most zinc is introduced into water by artificial pathways such as by-products of steel production coal-fired power stations, or from the burning of waste materials. Zinc is also used in some fertilizers that may leach into groundwater. Zinc is used as a corrosion inhibitor for Cooling water. The zinc water testing system is easy to use and results achieved are fairly accurate.Specifications:CodeRangeNo of testAE-3050.0,0.25,0.5,1.0,2.0,4.0 mg/l as zinc450PH Monitor Test Kit
Approx. Rs 800 / PieceGet Latest Price
Product Details:| Shelf Life | 12 Months |
| Number Of Tests | 500 |
pH Test Kit is the standard measure of how acidic or alkaline a solution is. It is a measure of the hydrogen ion concentration in solution. Ph is important because chemical processes take place when water has a certain ph. A ph indicator, giving different colors at different ph is a simple and reliable method to read ph for routine monitoring. Our AQUASOL ph water test kit comprises of a universal indicator, giving clear colours which match the colour chart perfectly. An extremely easy to use product, it finds usage in almost all processes
DPD Test Kit
Approx. Rs 1,000 / PieceGet Latest Price
Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand, contact time, ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL chlorine test is available as three different types, DPD method, Iodometric method and OT method. The kit gives very reliable results. The end point is very sharp and easily discernible by the user. Even a shop floor worker will be able to get desired results with our test kit. Specifications: Code Range No of test AE-205 0.1-2.0 mg/l as chlorine 200 AE-215 0.2-4 mg/l as chlorine 200 AE-246 10-200 mg/l as chlorine 300 AE-246l 1-20 mg/l as chlorine 300 AE-235 0.05, 0.1, 0.2, 0.4, 0.7, 1.0 mg/l as cl2 450 AE-236 0.5, 1.0, 2.0, 3.0, 4.0, 5.0 mg/l as cl2 450 AE-237 0.2, 0.4, 0.7, 1.0, 2.0, 3.0 mg/l as cl2 450 AE-238 0.1, 0.2, 0.5, 1.0, 1.5, 2.0 mg/l as cl2 450 AE-239 0.1, 0.2, 0.5, 1.0, 1.5, 2.0 mg/l as cl2 225Chlorine Dioxide Test Kit
Approx. Rs 1,000 / Piece(s)Get Latest Price
Chlorine dioxide is a broad-spectrum micro biocide effective over a wide ph range. Chlorine dioxide is effectively used in the control of microbiological growths in industrial cooling waters under conditions unfavorable to chlorine. This water test is a titrimetric one, generally used by cooling tower maintenance personnel to monitor residuals of the oxidising microbiocide. Specifications Code No of test AE-405 0.24.0 mg/l as chlorine dioxide 100
Turbidity Test Kit
Approx. Rs 1,000 / Piece(s)Get Latest Price
Turbidity is a principal physical characteristic of water. It is caused by suspended matter or impurities that interfere with the clarity of the water. These include clay, silt, finely divided inorganic and organic matter, soluble coloured organic compounds, and plankton and other microscopic organisms. Turbidity is the measure of relative clarity of a liquid. Clarity is required for drinking water and in manufacturing uses. This AQUASOL water turbidity test kit is simple and adequate. It has been designed for onsite use. It suffices its purpose and helps regular monitoring. Specifications Code Range AE-300 1 , 5 , 10 , 20 ntu
Explore More Products
B.S.K Kishore (CEO)
Hyderabad - 500003, Telangana, India
© B. S. K. Technologies. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited