TDS Meter

Our company specializes in offering a wide range of on line TDS meter, which are extensively
used to analyze the amount of total dissolved solids in a solution. Further, these products are
widely appreciated for the properties like easy to install, accurate reading and light weight.
moreover, these machines finds usage in biological research laboratories, chemical, water
treatment, rubber plants and other industries. Additionally, these TDS meters come with advance display and gives very accurate measurement.

Item Code: HI98301

Offering Digital TDS Meter:
Pocket EC, TDS meters: We supply Hanna, Eutech, HM digital, Pocket type tds meters, pen type tds meters, digital tds meter, Digital Pocket tds meter, On line tds meters, Digital on line tds meters.
Accurate, Simple, Sturdy, high-tech & inexpensive meter which fits in your hand convenient to measure Conductivity of the solution. 
The casing has been designed for increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The temperature sensor is exposed to provide faster response time. 
>> Specifications : 
HI 98301 HI 98302 HI 98303 HI 98304 
(DiST 1) (DiST 2) (DiST 3) (DiST 4) 
Range : 1999 ppm (mg/L) 10.00 ppt (g/L) 1999 mS/cm 19.99 mS/cm 
Resolution : 1 ppm (mg/L) 0.01 ppt (g/L) 1mS / cm 0.01 mS/cm 
Accuracy : 2 % F.s 2 % F.s 2 % F.s 2 % F.s 
Calibration : Manual Single Point for all 
Battery : 4 1.5V / approx. 200 hours of continuous use 
Dimension : 175 x 41 x 23 mm 
Weight : 95 g

Other Information

• Minimum Order Quantity: 10 Meter

Item Code: TDS3

TDS Meter (HOLD) Handheld Meter- TDS-3
Features:

• Ideal for commercial use. Includes a carrying case with belt clip.
• Highly efficient and accurate due to its advanced microprocessor technology.
• Hold Function: saves measurements for convenient reading and recording.
• Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
• Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
• Built-in digital thermometer 
• Display: large and easy-to-read LCD screen.
• Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. 
• Meters can be recalibrated with a mini-screwdriver.
• Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).

Specifications:

• TDS Range: 0 - 9990 ppm (mg/L)
• Temp. Range: 0 - 80 degrees Celsius
• Resolution: 1 ppm, 1 degree Celsius (also available in 10 ppm)
• Accuracy: +/- 2%
• Conversion Factor: NaCl (avg. 0.5)
• ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)
• Power source: 2 x 1.5V button cell batteries (included) (357A)
• Battery life: 1000 hours of usage
• Dimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)
• Weight with case: 76.5g (2.7 oz)
• Weight without case: 56.7g (2 oz)

 
 

Other Information

• Delivery Time: EXSTOCK